Calculation of the usable heat from a rotary screw compressor

Select unit
Select heating system
dT K
N.B. This calculation is based on the general principles of heat generation in oil-injected rotary screw compressors. As standard, heat exchangers are used to heat water from 15 °C (59 °F) to 70 °C (158 °F) (dT = 55 K) or 45 °C (113 °F) to 70 °C (158 °F) (dT = 25 K). This calculation tool is used to obtain approximate values for an initial estimate in the offer phase. To confirm technical data and heat exchanger design, e.g. for deviating temperatures, please contact your responsible KAESER expert.

Please use a decimal point as separator! (Thousands separators are not used.)


kW
h
m³/h
kWh
Days

Savings for heating with heating oil


$/l
kWh/l
kg CO2/l
%
$/Year
kWh/Year
t CO2/Year

Savings for heating with natural gas


$/m³
kWh/m³
kg CO2/m³
%
$/Year
kWh/Year
t CO2/Year

* e.g. Condensing heating


Please enter your namePlease enter your valid emailPlease enter your phone
Powered by
Thanks for giving us your feedback.
Dark mode