Compressed air dryers

Models: TAH 4 to TCH 35
Flow capacity: 12 to 125 scfm

Featuring our proven stainless steel heat exchangers, these non-cycling dryers provide pressure dew points as low as 38°F.

Models: TA 5 up to TF 251
Flow capacity: 20-885 scfm at 100 psig

These energy-saving refrigeration dryers provide a minimum pressure dew point of 38°F.

Dual Control
Models: TG 301 to TI 901
Flow capacity: 1000 to 3000 scfm @ 100 psig

Demand Manager
Models: TF 171E to TI 901E
Flow capacity: 600 to 3000 scfm @ 100 psig

These refrigerated dryers offer a choice of two energy-saving control methods to suit the specific industrial application.

Model: KAD series
Flow capacity: 40 to 5400 scfm @100 psig
Pressure dew point to: -100°F

These efficient and reliable heatless desiccant dryers provide pressure dew points down to -100°F.

Model: KADW series
Flow capacity: 7 to 50 scfm @100 psig
Pressure dew point to: -100°F

Fully enclosed and ready to install, these heatless desiccant dryers feature a control panel on the exterior for easy monitoring. They can be mounted virtually anywhere to conserve floor space.

Model: KBD Series
Flow capacity: 500 to 4300 scfm
Pressure dew point to: -40°F

These externally heat-regenerative desiccant dryers produce dew points as low as -40°F and have outstanding energy savings by heating atmospheric air for regeneration and using no purge air.

Model: KED Series
Flow capacity: 300 to 3200 scfm
Pressure dew point to: -40°F

KED externally heat regenerative desiccant dryers in standard configuration produce dew points as low as -4°F. When equipped with the optional “Purge Booster” they will produce dew points as low as -40°F. KED Heated purge dryers provide excellent energy savings by using only 7% process (purge) air for regeneration.

Models: DT
Flow capacity: 700 to 5,300 scfm

These units combine refrigerated dryers with desiccant dryers for optimum energy saving potential. They are ideally suited for large volume applications where the required dew points vary seasonally.

Model: HTRD
Flow capacity: 20 to 145 scfm

Specifically designed to handle the high discharge temperatures of piston compressors, these refrigerated dryers can provide dew points as low as 50 °F at rated conditions.

Model: KCA
Flow capacity: 10-330 scfm

The non-cycling refrigerated dryers are ideally suited for applications where air is used to cool parts or molds.

Model: KMM Series
A wide range of air flow capacities are available
Pressures: up to 200 psig

These space-saving modular dryers are perfect for point-of-use applications and can provide pressure dew points from +50°F to -40°F.

Models: KBS Series
Inlet capacities: 14.4 to 1030 scfm @ 100 psig

These complete purification systems meet all international standards for breathing air.