Rotary Screw Compressors with Air Dryers & Receivers

Water vapor is unavoidable in compressed air, and left untreated, it causes corrosion, contaminates tools, and shuts down production. Our AIRTOWER and AIRCENTER packages solve that problem in a single footprint. 

Each one pairs a rotary screw air compressor with dryer and air receiver components built to work together. You get clean, dry compressed air with a space-saving design that fits workshops and smaller industrial facilities without a dedicated compressor room.

AIRTOWER


kaeser airtower compact air compressor system package
All-in-one on just 6.6 sq. ft with the AIRTOWER series. And the best part of it: You can start work immediately!
 
  • Up to 7.5 hp
  • With rugged polyethylene enclosure
  • SIGMA CONTROL controller with electricity-saving control modes

AIRCENTER


AIRCENTER screw compressors

AIRCENTERS from KAESER for industry and trade – a large selection of premium quality machines

  • Up to 20 hp 
  • Ten models to choose from
  • Efficient SIGMA CONTROL controller with electricity-saving control modes 

One Package, Three Components

A traditional compressed air system means sourcing a compressor, a dryer, and a receiver separately, then piping them together and finding floor space for each one. Our packages fold all three into a single screw compressor with a dryer and receiver unit, factory-matched so the dryer is sized correctly to the compressor's output.

Installation is faster, the footprint is smaller, and there's one control panel instead of three separate systems to monitor. That's the difference between an air compressor with a dryer and receiver unit built as a single system and one with components bolted together after the sale.

Built to Scale With Your Facility

Air demand looks different in a single-bay shop than it does on a plant floor, and we built our lineup around that range rather than a single spec. On the smaller end, a compact air compressor with an air dryer and receiver tank is ideal for workshops and single-shift operations where floor space is tight. 

As demand grows, you can scale up to an industrial air compressor with a dryer sized for multi-shift plants and higher air draw. Either way, you're matching the package to your usage instead of over-buying capacity you don't need or undersizing a system you'll outgrow in a year.

Applications

An all-in-one air compressor, dryer, and receiver tank package works anywhere floor space is tight and where reliable, moisture-free air is essential. Common uses include: 

  • Automotive and vehicle repair shops: Pneumatic tools, paint booths, and tire equipment all require dry air to prevent moisture from contaminating paint finishes or fouling tools. 
  • Machine shops and tool rooms: CNC equipment and precision machining need stable, moisture-free air to protect tolerances and prevent rust on cutting tools and fixtures. 
  • Metal fabrication and welding: Plasma cutting and pneumatic clamping systems run cleaner and last longer on dry air. A compact package fits alongside existing equipment without a separate mechanical room. 
  • Woodworking and furniture production: Spray finishing and pneumatic sanders need moisture-free air so finishes cure properly and equipment doesn't corrode from trapped condensate. 
  • General manufacturing and assembly lines: Pneumatic actuators, packaging equipment, and assembly tools all depend on consistent, dry air pressure to keep production running without unplanned downtime. 
  • Job shops and smaller industrial facilities: Where a full compressor room isn't practical, an all-in-one package delivers plant-grade air quality in a fraction of the space a separate compressor, dryer, and receiver would need.

Get the Right Package for Your Facility

AIRTOWER and AIRCENTER packages are available in a range of standard sizes, so there is a model for your facility's air demand. Our team will review your shift schedule and equipment, then help you choose the hp, footprint, and control options that fit now and leave room to grow.

Frequently Asked Questions About Air Compressor Packages With Dryers & Receivers


What's the difference between a refrigerated dryer and a desiccant dryer, and which one is built into these packages?

AIRTOWER and AIRCENTER units use refrigerated dryers, which cool compressed air to condense out moisture and are the standard choice for general shop and plant air. Desiccant dryers remove moisture to a much lower dew point and are used for applications like outdoor piping in freezing climates or processes with tighter air-quality requirements. Most workshop and industrial applications run well on refrigerated drying.

How do I know what size compressor, dryer, and receiver package my facility needs?

Sizing starts with adding up the cfm (cubic feet per minute) your tools and equipment draw at once, then building in headroom for future equipment or expansion. Physical space, ventilation access, and your facility's electrical supply (single-phase or three-phase) also factor into which model fits. Our team reviews these details with you directly rather than recommending a package from a general chart.

How often does a rotary screw compressor with a built-in dryer and receiver need maintenance?

Routine maintenance includes oil changes, air and oil filter replacements, and periodic checks of the condensate drains on the dryer and receiver to confirm moisture is being removed. The receiver also needs its safety relief valve tested, a visual check for leaks and corrosion, and any pressure vessel inspections your local regulations require. Because the compressor, dryer, and receiver are built into one package, a factory-trained technician can typically service all three in a single visit rather than scheduling separate calls. Our service team can set up a maintenance schedule matched to your duty cycle.